Redline AN-50e Point to Point Radio
The Redline Access Node 50 (AN-50) is a high-performance fixed wireless Ethernet bridge
terminal system configurable to operate as a high-speed point-to-point link or optionally, as a
point-to-multipoint system (upcoming release). It provides the industry's first true low-cost
and scalable multi-service platform to support both backhaul and access functions from a
common equipment infrastructure and management system. The system can deliver over-
the-air rates of up to 72 Mbps, with a non-line-of-sight (NLOS) capability to address
challenging deployment scenarios.
The AN-50 operates in the license-exempt UNII band of 5.8 GHz and includes patented
technologies to address potential inter-cell interference issues. The system also features
dynamic adaptive modulation in both the upstream and downstream directions, automatically
selecting BPSK, QPSK, 16 or 64 QAM, depending on propagation conditions. This maximizes
spectral efficiency and hence revenue potential for a given deployment scenario. The system
features several antenna options to address deployment ranges of over 50 km (30 mi).
AN-50 SYSTEM SPECIFICATIONS
• Point to Point and Point to Mutil-Point (through future optional software upgrade)
• Non-line-of-sight (NLOS) and Optical-Line-of-Sight (OLOS) deployments
• System Capability: OFDM, non-line-of-sight (NLOS) operations, PTP and PMP mode
• RF Bands 5.725 - 5.825 GHz, 5.470 - 5.725 GHz*
• Channels: 17 software selectable frequencies
• Channel Size: 20 MHz
• RF Dynamic Range: > 50dB
• Range
• Max TX Power: -20 to +20 dBm (region specific)
• Rx Sensitivity: -86 dBm at 6 Mbps (based on BER of 1x10- 9 )
• IF Cable: Max length up to 250 ft (76m) using RG6U, Max 500 ft (152m) using RG11U, > 800
ft (240m) using LMR cabling DC power via IF cable
• Dynamic Channel control: DFS*, ATPC*
• Network attributes: Transparent bridge, DHCP pass through, VLAN pass through, , 802.3x
Ethernet flow control, 802.1q* & 802.1p network traffic prioritization
• Modulation options: Bi-Directional; BPSK, QPSK, 16 QAM, 64 QAM
• Over The Air Encryption: 64-bit private key encryption
• Coding Rates 1/2, 2/3, and 3/4 adaptive coding (burst to burst)
• MAC: Concatenation/fragmentation2, Automatic repeat request (ARQ) error correction
• Max Range: Over 10 km / 6 miles non-line-of sight, Over 80 km / 50 miles line-of sight
• Duplex Technique Dynamic TDD (time division duplexing)
• Backhaul connection: 10/100 Ethernet (RJ45)
• System configuration: Web Interface and SNMP, CLI via telnet or local console port
• Redundant Power 110-240 VAC or 48 VDC, optional dual power supplies for redundancy
• Temperature Range: AN-50 teminal: 32F to 131F, exceeding 137 mph/220km/hr
PRODUCT SPECIFICATIONS
• Indoor Unit: Indoor network interface unit with PTP software loaded
• AN-50 User Guide
• 10/100 Ethernet port
• single 110 / 220 VAC, 60 Watt power supply.
• 20dBm transmit power as per regulatory requirements for each region.
redline_an-50_5058_200.jpeg
Redline AN-50 point to point radio with single 110/220 VAC power supply (RDL505820-1A) .
Frequency 5.7-5.8GHz, over-air-rate up to 72Mbps, Dimensions 17"x12"x1.75".
Over the air rate of 72Mbps can be achieved with software upgrade RDLAN50-5.
The Redline Access Node 50 (AN-50) is a high-performance fixed wireless Ethernet bridge
terminal system configurable to operate as a high-speed point-to-point link or optionally, as a
point-to-multipoint system (upcoming release). It provides the industry's first true low-cost
and scalable multi-service platform to support both backhaul and access functions from a
common equipment infrastructure and management system. The system can deliver over-
the-air rates of up to 72 Mbps, with a non-line-of-sight (NLOS) capability to address
challenging deployment scenarios.
The AN-50 operates in the license-exempt UNII band of 5.8 GHz and includes patented
technologies to address potential inter-cell interference issues. The system also features
dynamic adaptive modulation in both the upstream and downstream directions, automatically
selecting BPSK, QPSK, 16 or 64 QAM, depending on propagation conditions. This maximizes
spectral efficiency and hence revenue potential for a given deployment scenario. The system
features several antenna options to address deployment ranges of over 50 km (30 mi).
AN-50 SYSTEM SPECIFICATIONS
• Point to Point and Point to Mutil-Point (through future optional software upgrade)
• Non-line-of-sight (NLOS) and Optical-Line-of-Sight (OLOS) deployments
• System Capability: OFDM, non-line-of-sight (NLOS) operations, PTP and PMP mode
• RF Bands 5.725 - 5.825 GHz, 5.470 - 5.725 GHz*
• Channels: 17 software selectable frequencies
• Channel Size: 20 MHz
• RF Dynamic Range: > 50dB
• Range
- * Concatenation/fragmentation
* Over 10km /6miles non-line-of-sight with high-gain PTP antennas
* Over 80km /60miles line-of-sight with high gain PTP antennas
* Over 19km /12miles Point to Multipoint antennas
• Max TX Power: -20 to +20 dBm (region specific)
• Rx Sensitivity: -86 dBm at 6 Mbps (based on BER of 1x10- 9 )
• IF Cable: Max length up to 250 ft (76m) using RG6U, Max 500 ft (152m) using RG11U, > 800
ft (240m) using LMR cabling DC power via IF cable
• Dynamic Channel control: DFS*, ATPC*
• Network attributes: Transparent bridge, DHCP pass through, VLAN pass through, , 802.3x
Ethernet flow control, 802.1q* & 802.1p network traffic prioritization
• Modulation options: Bi-Directional; BPSK, QPSK, 16 QAM, 64 QAM
• Over The Air Encryption: 64-bit private key encryption
• Coding Rates 1/2, 2/3, and 3/4 adaptive coding (burst to burst)
• MAC: Concatenation/fragmentation2, Automatic repeat request (ARQ) error correction
• Max Range: Over 10 km / 6 miles non-line-of sight, Over 80 km / 50 miles line-of sight
• Duplex Technique Dynamic TDD (time division duplexing)
• Backhaul connection: 10/100 Ethernet (RJ45)
• System configuration: Web Interface and SNMP, CLI via telnet or local console port
• Redundant Power 110-240 VAC or 48 VDC, optional dual power supplies for redundancy
• Temperature Range: AN-50 teminal: 32F to 131F, exceeding 137 mph/220km/hr
PRODUCT SPECIFICATIONS
• Indoor Unit: Indoor network interface unit with PTP software loaded
• AN-50 User Guide
• 10/100 Ethernet port
• single 110 / 220 VAC, 60 Watt power supply.
• 20dBm transmit power as per regulatory requirements for each region.
redline_an-50_5058_200.jpeg
Redline AN-50 point to point radio with single 110/220 VAC power supply (RDL505820-1A) .
Frequency 5.7-5.8GHz, over-air-rate up to 72Mbps, Dimensions 17"x12"x1.75".
Over the air rate of 72Mbps can be achieved with software upgrade RDLAN50-5.
Redline Communications
 |
 |
 |
 |
 |
 |
 |
New Redline 80i Radio. Available in either 5.4 GHz or
5.8 GHz - the first available 5.4 radio with FCC
certification for US operation.
The AN-80i is the latest addition to Redline's
RedCONNEX™ family of high performance wireless
broadband transport solutions. Delivering carrier-
grade performance and reliability that carriers and
other service providers have come to expect from
Redline's wireless access and backhaul products, the
AN-80i is the ideal solution for quickly establishing
point-to-point links that cost-effectively extend networks
to reach more customers.
Operating in the license-exempt 5 GHz band, the AN-
80i leverages proven OFDM technology to deliver
industry-leading, high-speed Ethernet throughput. With
its exceptional long range capabilities, the AN-80i is
able to establish and maintain reliable, robust
connectivity that can exceed 80 km (50 miles) in clear
line-of-sight conditions.
5.8 GHz - the first available 5.4 radio with FCC
certification for US operation.
The AN-80i is the latest addition to Redline's
RedCONNEX™ family of high performance wireless
broadband transport solutions. Delivering carrier-
grade performance and reliability that carriers and
other service providers have come to expect from
Redline's wireless access and backhaul products, the
AN-80i is the ideal solution for quickly establishing
point-to-point links that cost-effectively extend networks
to reach more customers.
Operating in the license-exempt 5 GHz band, the AN-
80i leverages proven OFDM technology to deliver
industry-leading, high-speed Ethernet throughput. With
its exceptional long range capabilities, the AN-80i is
able to establish and maintain reliable, robust
connectivity that can exceed 80 km (50 miles) in clear
line-of-sight conditions.
